After gaining registration, RTOs need to monitor several aspects including annual declarations, AVETMISS reporting, and marketing compliance, with validation being a major concern.
Although we've written about validation many times, let’s redefine it. ASQA refers to validation as a quality review of the assessment process.
Validation is the process of confirming accurate areas in an RTO's assessment process and pinpointing elements for improvement. With a correct understanding of its components, it’s less daunting.
Clause 1.8 in the SRTOs 2015 outlines that RTOs must ensure their assessment systems, including RPL, comply with training package requirements and the Principles of Assessment and Rules of Evidence.
According to the standards, two types of validation must be conducted.
The first kind of assessment validation ensures your RTO's assessment adheres to the training package requirements within your scope.
The following validation type ensures that assessments follow the principles of assessment and rules of evidence.
This indicates validation occurs before and after the assessment process. We will focus on the first type: assessment tool validation.
Defining the Two Types of Assessment Validation
Assessment Validation Unpacked
As we mentioned earlier and in our past blogs, validation consists of two parts: (1) assessment tool validation and (2) post-assessment validation.
Pre-assessment validation or assessment tool validation focuses on the first part of the clause, ensuring that all unit requirements are met and that workbooks are entirely compliant.
On the implementation side, post-assessment validation ensures Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.
Our focus here will be on assessment tool validation.
Methods for Conducting Assessment Tool Validation
After reviewing the two types of validation, let’s explore the specifics of assessment tool validation.
Timing for Conducting Assessment Tool Validation
Assessment tool validation is intended to confirm that all elements, performance criteria, and performance and knowledge evidence are met by your assessment tools.
This implies that any time new learning resources are obtained, assessment tool validation must be done before student use.
You don’t need to wait until the next scheduled validation in your 5-year cycle. Immediately validate new resources to ensure they’re ready for student use.
However, this isn't the only time to perform this type of validation. Conduct assessment tool validation also when you:
- you update resources
- new training products are added to your scope
- reviewing your course against training product updates
- when learning resources are identified as a risk during your risk assessment
ASQA applies a risk-based approach to regulate RTOs, expecting regular risk assessments. Hence, student complaints about learning resources are a good opportunity for assessment tool validation.
Training Products to Validate
Bear in mind, this validation aims to ensure compliance of all learning resources before use. All RTOs are required to validate all unit resources.
Key Resources for Assessment Tool Validation
Academic Resources
Given that you are conducting assessment tool validation, you will need the full array of your learning resources:
Mapping tool – this should be the first document to examine. It shows which assessment items correspond to unit requirements, facilitating quicker validation.
Learner/student workbook – check its suitability as an assessment tool during validation. Ensure instructions are clear and answer fields are sufficient. This is a common issue.
Assessor guide/marking guide – ensure sufficient instructions for assessors and clear benchmarks for each assessment item. Clear benchmarks are vital for reliable assessment outcomes.
Other related resources – may consist of checklists, registers, and templates created separately from the workbook and marking guide. Validate them to ensure they are appropriate for the assessment task and address unit requirements.
Team for Validation
Clause 1.11 outlines the requirements for validation panel members, noting that validation can be done by one or more people. Typically, RTOs require all trainers and assessors to attend and may invite industry experts.
Collectively, your validation panel should have:
Relevant vocational competencies and industry skills for the unit being validated
Recent expertise and skills in vocational teaching and learning
Any one of the following training and assessment qualifications:
TAE40116 Certificate IV in Training and Assessment or its successor
Validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool helps in both the validation process and documentation. It makes it simpler to see how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Simultaneously, it can serve as proof that you have validated your resources before they are used by students.
ASQA does not specify a required template for assessment tool validation, but many templates are accessible online. These tools usually have validators review the tools as a whole to ensure they meet the principles of assessment.
Principles of Assessment Guide Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Though these templates make validation easier, they can lead to judgment errors because they provide little room for comments on each assessment item.
We highly recommend using a more detailed template to inspect each unit requirement and its corresponding assessment items. Here is an example:
Element Performance Criteria Assessment Directions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Checked?
As mentioned in our blog post Common Problems In Assessment Tools, you need to ensure that your assessment tools allow trainers to follow assessment principles and evidence rules.
Core Principles of Assessment
Fairness – Does the assessment ensure equal opportunity and access for everyone?
Flexibility – Does the assessment provide different options to demonstrate competence according to individual needs and preferences?
Validity – Does the assessment evaluate what it is intended to evaluate? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment yield consistent results each time, regardless of the trainer? Will different assessors make the same decision on skill competence?
Rules of Evidence
Validity – Is the evidence verifying that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there adequate evidence to ensure the learner has the required skills and knowledge?
Authenticity – Does the assessment tool prove that the work is the candidate’s own?
Currency – Are the assessment tools reflective of current units of competency and contemporary industry practices?
Although these are commonly addressed in VET professional development and nationally recognised training, a lot of tools still fail to meet these requirements.
To prevent using learning resources that overlook some unit requirements, make sure to follow these guidelines:
Be Consistent with Your Teachings
Focus on the verbs used in the unit requirements and make sure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:
Complete each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:
change nappies
prepare bottles, bottle-feed babies and sanitize equipment
prepare solid food and feed infants
respond to baby signs and cues appropriately
prepare babies for sleep and soothe them
monitor and foster age-appropriate physical exploration and gross motor skills
Having students explain changing nappies for babies under 12 months old doesn’t directly address the get more info unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be carrying out the tasks.
Notice the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t meet the requirement.
Complete or Not Competent
Mind the lists. Again, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Be More Specific
Each assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s crucial that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What information might be included in a work package?
Possible answers include:
Mandatory resources
Relevant costs
Time required for activities
Assigned duties and responsibilities
When an assessment item requires multiple answers, specify how many answers a student must provide. This way, your assessment remains reliable, and the evidence collected is valid.
The same is true for assessment items with double-barrelled questions or those asking for multiple answers at once. Such questions can confuse both students and assessors, as demonstrated in the sample question below:
Identify a hazard and/or environmental issue in the workplace and select the most effective hazard control hierarchy.
Possible answers may include, but are not limited to:
Weather conditions – isolation of the work area, engineering, personal protective equipment
Work area and ground conditions – eliminating hazards, isolation, engineering
People – isolation, engineering, administrative controls
Structural hazards – substitution, isolation, engineering controls
Chemical hazards – isolation, engineering, administration
Equipment or machinery – isolation, engineering, administration
Avoiding double-barrelled questions simplifies responses for students and allows assessors to judge competence accurately.
Given these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” But these guarantees require waiting for an audit before rectifying noncompliance. This impacts your compliance history, so it’s better to take a safe and compliant route.